Skocz do zawartości
janek_pl

Nowy soft do Tvix 6500/7000

Rekomendowane odpowiedzi

Tvix 6500/7000 1.3.110

Changes from 1.3.95

- Video playback

- Improved AVI and MKV playback

o Improved compatibility

o Now, support MKV chapter.

If a file has chapters, ¡°CHAPTERS¡± OSD will be shown.

Can navigate to specific chapters using the previous, next key and Go-To popup.

o Fixed the bug that system reboot when playing DIVX(extension) files with embedded subtitles.

- Supports change of embedded subtitles in mp4 files.

- Supports moving 15sec back and forth on DVD with the up and down keys just like other files

- Fixed the pitch change when volume is changed with specific files.

- Fixed audio is out through HDMI when DVD is playing even though HDMI audio out is off.

- Audio playback

- Supports 24bit flac files

- Supports M4B files

- Fixed OGG does not sound on HDMI after boot.

- Picture playback

- Now, users can preview thumbnails if the files have a thumbnail in them.

o User can change the view mode just like the icon mode.

o On the thumbnail view mode, users can select files to view using Zoom, 0 and Scroll keys on the Remote controller. The menu will be shown on the bottom of the screen.

- Improved compatibility

- Shows EXIF information correctly.

- General

- Readability of characters has been improved including the subtitles

- Now supports more Wi-Fi modules

o D-link DWA-140(11n) (HW Ver: B1) and D-link DWA-110 (HW Ver: A1) are supported now.

- Now, FTP and SAMBA server start up option can be set on the setup.

- Now, users can change the FTP password.

- Now, users can set ID and password for the SAMBA access.

- Now, supports NTP server sync. (Settings for the NTP on the DTV tab moved to the network setting tab)

- Known issues for Video related

- Some TP/TS information may not correct.

- When HD Audio pass-through is on, S/PDIF does not output.

- When HD Audio pass-through is off with HD audio stream, the playback is not smooth.

o When DTS audio setting is digital, HDMI audio is ON and HD audio pass-through is set to ON, then audio is not heard on the SPDIF output.

o For the same setting, if HDMI audio is set to OFF, then audio is HEARD on the SPDIF output.

- Some TP/TS files may cause the system rebooting.

- Some WMV may not play correctly.

- The digital output for AAC/WMA is disabled.

- Does not support PCM audio track on MP4 now.

- Some low sampling frequency(below 32KHz) on AVI and MKV may not sound on HDMI.

- For MP3 files with low sampling frequency, the TVIX might crash while playing or trick play like FF or RW.

- M4A files are not supported now and AAC may not played correctly and this will be fixed on the later version.

- Known issues for PVR

- After channel changed, you may not here audio in short time. This is the bug from the chip manufacturer. To solve this, you can press DTV key or Audio key on the remote.

- Known issues for Video related

- Some TP/TS information may not correct.

- When HD Audio pass-through is on, S/PDIF does not output.

- When HD Audio pass-through is off with HD audio stream, the playback is not smooth.

¡Û When DTS audio setting is digital, HDMI audio is ON and HD audio passthrough is set to ON, then audio is not heard on the SPDIF output.

¡Û For the same setting, if HDMI audio is set to OFF, then audio is HEARD on the SPDIF output.

- Some TP/TS files may cause the system rebooting.

- Some WMV may not play correctly.

- The digital output for AAC/WMA is disabled.

- Does not support PCM audio track on MP4 now.

- Some low sampling frequency on AVI and MKV may not sound on HDMI.

- Some MKV with AAC may not sound.

- Known issues for Audio and pictures playing

- For MP3 files with low sampling frequency, the TVIX might crash while playing or trick play like FF or RW.

- M4A files are not supported now and AAC may not played correctly and this will be fixed on the later version.

- Known issues for PVR

- After channel changed, you may not here audio in short time. This is the bug from the chip manufacturer. To solve this, you can press DTV key or Audio key on the remote.

- Known issues for general issues.

- If you play files without refreshing the file list after delete files through FTP or SAMBA server, the system will reboot.

*** If you play files with HD audio tracks like Dolby TrueHD, , Dolby Digital Plus, DTS-HD MA or LPCM, you better turn on HD Audio pass through on the setup even though you don't have a receiver that supports decoding of these formats. Otherwise, you will hear strange noise with some repetitive popping noise. Currently, we don¡¯t support core decoding, if you don't have a HD audio decoder receiver, you need to select other then these HD audio tracks audio track for now.

<pobierz>

Udostępnij tę odpowiedź


Odnośnik do odpowiedzi
Udostępnij na innych stronach

Tvix 6500/7000 V1.3.125

Changes from 1.3.110

Supports DWL-140 11n HW Ver: B1

Fix USB Rom drives handling bug

RFX Engine update(MKV and AVI)

Supports HE-AAC correctly.

Fix 32Khz audio does not sound through HDMI

Better supports MKV Chapter navigation.

Fix reboot problem after stop playing some files.

Fix the DVD duration does not show on Search(Go to) popup

Fix some audio does not play till the end

Other minor bug fix .

DTV

Fixed audio issue with Portuguese stations.

- Known issues and limitations for Video related

- Some TP/TS information may not correct.

- When HD Audio pass-through is on, S/PDIF does not output.

- When HD Audio pass-through is off with HD audio stream, the

playback is not smooth.

¡Û When DTS audio setting is digital, HDMI audio is ON and HD

audio pass-through is set to ON, then audio is not heard on the SPDIF

output.

¡Û For the same setting, if HDMI audio is set to OFF, then it

sounds through the SPDIF output.

- Some TP/TS files may cause the system rebooting.

- Some WMV may not play correctly.

- The digital output for AAC/WMA is disabled.

- Does not support PCM audio track on MP4 now.

- Some MKV with AAC may not sound.

- Known issues for Audio and pictures playing

- For MP3 files with low sampling frequency, the TVIX might crash

while playing or trick play like FF or RW.

- M4A files are not supported now and AAC may not play correctly.

- Known issues for PVR

- After channel changed, you may not here audio in short time. . To

work around it, you can press DTV key or Audio key on the remote.

- Known issues for general issues.

- If you play files without refreshing the file list after delete

files through FTP or SAMBA server, the system will reboot.

*** If you play files with HD audio tracks like Dolby TrueHD, ,

Dolby Digital Plus, DTS-HD MA or LPCM, you better turn on HD Audio pass

through on the setup even though you don¡¯t have a receiver that supports

decoding of these formats. Otherwise, you will hear strange noise with

some repetitive popping noise. Currently, we don¡¯t support core

decoding, if you don¡¯t have a HD audio decoder receiver, you need to

select other then these HD audio tracks audio track for now.

Pobierz

Udostępnij tę odpowiedź


Odnośnik do odpowiedzi
Udostępnij na innych stronach
Napisano (edytowane)

Jest już druga wersja fw z obsługą BluRay:

Public Unofficial DViCo Blu-ray: V99.3.126

http://www.mpcclub.com/modules.php?name=Fo...;t=21803#163841

Ściągajcie bo oni to krótko pokazują.

Bezpośredni link <KLIK>

oraz alternatywny gdyby zdjęli <klik>

Edytowane przez janek_pl

Udostępnij tę odpowiedź


Odnośnik do odpowiedzi
Udostępnij na innych stronach

Ciągle coś nowego.

Jeszcze nie zdążyłem wgrać poprzedniego a pojawiła sie już nowa beta: V1.3.129

http://demod.dvico.com/preRelease/tvix_M-6x00_1.3.129.zip

Zmiany to:

Changes from 1.3.125

1. Added DVI for the TV connection.

- If you are using HDMI to DVI cable, you must select DVI.

- If DVI is selected, HDMI audio output and HD audio pass-through

menu will be disabled.

- If Auto EDID is selected with DVI option, the Video and Audio

option will be set based on the EDID.

- If other than Auto EDID is selected, Audio will be set depends on

the selected TV connection type.

- When user pressed the TV outkey, the DVI will be set for 480P and

576P and audio data will not be transmitted over HDMI. Therefore, if you

use HDMI, you must select correct option on the setup.

- On VFD, DVI will be shown only if DVI is selected. If HDMI is

selected, there will be no info for the TV connection type.

- Fixed DVI motnitor goese black in specific case.

2. Fixed the IP is not correctly reset if the cable is re-connected.

Known issues and limitations for Video related

- Some TP/TS information may not correct.

- When HD Audio pass-through is on, S/PDIF does not output.

- When HD Audio pass-through is off with HD audio stream, the

playback is not smooth.

¡Û When DTS audio setting is digital, HDMI audio is ON and HD

audio pass-through is set to ON, then audio is not heard on the SPDIF

output.

¡Û For the same setting, if HDMI audio is set to OFF, then it

sounds through the SPDIF output.

- Some TP/TS files may cause the system rebooting.

- Some WMV may not play correctly.

- The digital output for AAC/WMA is disabled.

- Does not support PCM audio track on MP4 now.

- Some MKV with AAC may not sound.

- TVIX may not get IP from DHCP server after change between DTV and

Player modes and this can be solved by retrying DHCP on the setup.

Known issues for Audio and pictures playing

- For MP3 files with low sampling frequency, the TVIX might crash

while playing or trick play like FF or RW.

- M4A files are not supported now and AAC may not play correctly.

Known issues for PVR

- After channel changed, you may not here audio in short time. . To

work around it, you can press DTV key or Audio key on the remote.

Known issues for general issues

- If you play files without refreshing the file list after delete

files through FTP or SAMBA server, the system will reboot.

*** If you play files with HD audio tracks like Dolby TrueHD, ,

Dolby Digital Plus, DTS-HD MA or LPCM, you better turn on HD Audio pass

through on the setup even though you don¡¯t have a receiver that supports

decoding of these formats. Otherwise, you will hear strange noise with

some repetitive popping noise. Currently, we don¡¯t support core

decoding, if you don¡¯t have a HD audio decoder receiver, you need to

select other then these HD audio tracks audio track for now.

Edytowane przez Abcd

Udostępnij tę odpowiedź


Odnośnik do odpowiedzi
Udostępnij na innych stronach

Ciągle coś nowego.

Jeszcze nie zdążyłem wgrać poprzedniego a pojawiła sie już nowa beta: V1.3.132

Coś dla BODEXa: obsługa ISO BD

http://www.mpcclub.com/modules.php?name=Fo...;t=21914#164556

opis:

This is a beta version which supports Universal Jukebox (including BDMV structure) function. The beta version of TVIX software is not fully tested and supported when you have a problem. If you are interest in this new function with possible bugs, feel free to download and try. As you know, you can go back to the original firmware anytime you want.

http://demod.dvico.com/PreRelease/tvix_M-6x00_1.3.132.zip

Supporting HDMV files (UJukebox function)

1. The main feature of this firmware is to select a certain audio track or subtitle out of several sorts of those when playing HDMV structured files stored in the HDD.

2. This version of firmware doesn't support all functions of ?BDMV? folder, especially the files with profile 1.1 and 2.0 due to the limitation of the hardware.

3. The folder structure should be the same as the original one, otherwise TViX doesn?t playback your HDMV files properly, protected files and the files with HDMV region code either.

4. The ?Popup Menu? when pressing the ?Menu? button of the remote control while watching HDMV files is either original graphic menu that the title supports or simple menu that Dvico made.

5. There are two ways to playback HDMV files

A. In case that you set the ?Smart Navigation? to ?Smart? in the TViX Setup Page, HDMV files automatically playback with selecting the main folder.

B. In case that you set the ?Smart Navigation? to ?Normal? in the TViX Setup Page, you need to select ?index.bdmv? files in the HDMV folder.

6. Possible to add the subtitle that HDMV files doesn't?t have.

A. If you want this additional subtitle to be default one, put the file on the same folder index.bdmv located and name must be ?index.xxx?, for example, index.smi.

B. Possible to change to the additional subtitle while watching by using the ?Function? button on the remote control.

7. To change a subtitle language to another one while watching, either press the ?Menu? button or the ?Subtitle? button on the remote control.

8. To change audio track, press the ?Audio? button on the remote control.

9. To go to another chapter, press? |??? or ???|? on the remote control or you can press 'Go to' key on the remote.

10. You can use 100 times this version of firmware. The TViX automatically counts down from 100, but it counts one in spite of playing HDMV files 10 times unless you boot the TViX.

*** Possible to play HDMV structured files compressed by ISO format, but you?ve got to select the file even if setting the ?Smart Navigation? to ?Smart?.

Setting the UJukebox Mode in the TViX Setup Page.

1. Set to the ?Lite?.

Dvico simple menu pops up always.

2. Set to the ?Basic?

The original graphic menu appears that the title supports. And Dvico simple menu pops up in case of the HDMV files with the menu TVIX don?t support.

HDMV files in IFO folder structure and ISO files.

Most HDMV files stored in IFO folder structure mainly consist of ?BDMV? and ?Certificate? folder. As explained above, there are two ways to playback the HDMV files, Smart Navigation and selecting index.bdmv. For stable performance, we recommend not to change the folder structure.

Files in ISO format must be selected to be played even if setting ?Smart Navigation? to ?Smart?. ISO files may playback smoothly when played through the network.

Caution.

*** An HD audio receiver and HDMI 1.3 cable are necessary to playback HDMV files.

*** In the TViX Setup page, set the ?Audio? to ?Digital?, ?HDMI Audio? to ?On?, and ?HD Audio Pass Through? to ?On?.

*** It may not work properly in case of no 1.3 HDMI cable, HDMI to DVI connection and analog video mode.

*** Playing HDMV files in public places is strictly prohibited due to the laws and regulations related with license.

*** We recommend to set the ?Auto Switch? in the TViX Setup page to either ?NTSC/1080p24Hz? or ?NTSC/PAL/1080p24Hz?, otherwise the resolution of subtitle and menu may not be clear or vivid. It?s one of the hardware limitations.

Edytowane przez dominikjestem

Udostępnij tę odpowiedź


Odnośnik do odpowiedzi
Udostępnij na innych stronach

Firmware 1.3.137 (Regular)

DOWNLOAD

http://demod.dvico.com/PreRelease/tvix_M-6x00_1.3.137.zip

Changes from 1.3.129

1. Fixed NTP server option is disabled when IP is get properly

through DHCP server.

2. Now TV connection type is set to HDMI even if the EDID is not get

from HDMI.

3. Imporved Enhanced AC3 stream on recorded streams through a tuner.

4. Network stream performance is optimized.

5. For DTV, fixed the recorded file name is not correctly set for

the som Czech stations.

Known issues and limitations for Video related

- Some TP/TS information may not correct.

- When HD Audio pass-through is on, S/PDIF does not output.

- When HD Audio pass-through is off with HD audio stream, the

playback is not smooth.

¡Û When DTS audio setting is digital, HDMI audio is ON and HD

audio pass-through is set to ON, then audio is not heard on the SPDIF

output.

¡Û For the same setting, if HDMI audio is set to OFF, then it

sounds through the SPDIF output.

- Some TP/TS files may cause the system rebooting.

- Some WMV may not play correctly.

- The digital output for AAC/WMA is disabled.

- Does not support PCM audio track on MP4 now.

- TVIX may not get IP from DHCP server after change between DTV and

Player modes and this can be solved by retrying DHCP on the setup.

Known issues for Audio and pictures playing

- For MP3 files with low sampling frequency, the TVIX might crash

while playing or trick play like FF or RW.

- M4A files are not supported now and AAC may not play correctly.

Known issues for PVR

- After channel changed, you may not here audio in short time. . To

work around it, you can press DTV key or Audio key on the remote.

Known issues for general issues

- If you play files without refreshing the file list after delete

files through FTP or SAMBA server, the system will reboot.

*** If you play files with HD audio tracks like Dolby TrueHD, ,

Dolby Digital Plus, DTS-HD MA or LPCM, you better turn on HD Audio pass

through on the setup even though you don¡¯t have a receiver that supports

decoding of these formats. Otherwise, you will hear strange noise with

some repetitive popping noise. Currently, we don¡¯t support core

decoding, if you don¡¯t have a HD audio decoder receiver, you need to

select other then these HD audio tracks audio track for now.

Udostępnij tę odpowiedź


Odnośnik do odpowiedzi
Udostępnij na innych stronach

Koreańczycy ostro pracują ostatnio.

Nowy soft co kilka dni.

Oto jedna z opini na temat ostatniego z mpcclub:

"Tested a number of DVD ISO's, blu-ray M2TS's, high-bitrate, low-bitrate, number of JPEG sequences, high resolution, low-resolution, number of MP3's, 64/128/192/384 kbps. Tested internal HD, QNAP539 and ReadyNAS NV+ NAS's using 10/100 allthough on gigabit network, 3 TViX 6500 running in parallel.

Found no errors with what I have (using NFS). No stuttering. Dolby, DTS, HD sound all working. JPEG's back to nice fading - no artifacts. MP3's play at multiple sampling frequencies (I have no one below 64 kbit/s). Using SAMBA stuttering occurs on high-speed BluRays (M2TS's) like in previous versions - but as stated using NFS it works. Only issue with NFS is lack of support for special national characters that works like a charm using SAMBA - but this I can live with.

Only thing not working correctly is DHCP. Using fixed TPC/IP works as always.

All DVD's & BluRay decoded using AnyDVD. DVD ISO's made using CloneDVD2. BluRay's to M2TS using Clown (EAC3TO, TSMuxer). All using standard settings.

So far I'm satisfied - and have only had very few problems along the way with most FW versions (none of them not circumventable or not able to live with)."

Edytowane przez Abcd

Udostępnij tę odpowiedź


Odnośnik do odpowiedzi
Udostępnij na innych stronach

Tvix 6500/7000 1.3.148 (BDLite Edition)

Changes from 1.3.129 TViX HD M-6500 1.3.147/1.3.148(UJuckbox) Release

note audio playlist Manual <http>

1) Added the Audio playlist function (* Please download the

detailed guide for the audio playlist function)

- Select multiple songs that you want to listen and save them

as a playlist conveniently (to be saved in Audio/Playlist folder)

- When pressing ??Audio?? key on the remote, it will move to the

Audio/Playlist folder automatically

- Listen to music without TV or display

?¤ When setting Autorun in setup, the first playlist in the

Audio/Playlist folder will be played automatically unless there is

?°autorun?? folder.

2) Contents native resolution output function has been Added

(Please read below carefully before use the ?°Native resolution?? feature.

If a user do not set resolution correctly, the video may not be

displayed or I might hurt display. Please use this function with caution)

2-1) Native Resolution menu on ?°SET UP??

- If a user turns on Native Resolution on the

Setup-Video/Audio, the Auto NTSC/PAL/24Hz option will be disabled and

will not be used. The NTSC/PAL/24Hz option will be functional if and

only if Native Resolution is turned off.

- When a user turns on Native Resolution, a popup, will be

shown. the user can select native content resolution output he want

?¤ Users can turn on and off for the each resolution.

?¤ If the user turns on, the check box will be checked and when a

video file is played, the source will be output according to the

resolution and scan type(progressive/interlace) regardless of the

current TV out setting.

?¤ If the user turns off, the source will be scaled to the

resolution and refresh rate set by the TV out setting in SET UP menu.

?¤ If the user??s display device does not support specific input

mode, users will not see any video. In this case, just press stop and

the video output mode will go back to the initial mode on the SET UP

menu..

?¤ For the 720p, we separated the mode to ?°720p24Hz?? and

?°1080p24Hz??, since most display devices do not support 720p24Hz mode. If users displays do not support neither 720p24Hz nor 1080p24Hz, users

will not be able to see 24Hz video clips.

2-2) Resolution change popup

- If TVIX does not detect resolution and frame rate correctly,

the Native Resolution will not work properly. In this case, users can

press TV Out button while video clips are played. They can change to a

specific output mode by selecting correct resolution and frame rate.

- TV out button will show the Resolution change popup if the

video clip is playing. Otherwise, it will change the Video mode

NTSC->480p(DVI)->PAL->576p(DVI) for the a emergency recovery.(If a user

use HDMI, a user must reset set video output mode on the using SETUP

menu, otherwise, audio will not be sent over HDMI)

Available frame rate(refresh rate) table for each resolution

480i

59.94Hz, 60Hz

576i

50Hz

480p

59.94Hz, 60Hz

576p

50Hz

720p

23.976Hz, 24Hz, 29.97Hz, 30Hz, 50Hz, 59.94Hz, 60Hz

1080i

50Hz, 59.94Hz, 60Hz

1080p

23.976Hz, 24Hz, 29.97Hz, 30Hz, 50Hz, 59.94Hz, 60Hz

3) Audio play besides audio playlist function

- Fixed the shuffle function for autorun in setup

- Supports M4A extension

4) Video playing

- Provides page up/down function with ??|<<??, ??>>|?? keys on the

remote for the audio/subtitle/chapter pop-up

- Rebooting problem when playing mkv that includes the vob

subtile has been fixed.

5) Network

- Support for deleting files on network folder has been added

(*Netshare isn??t supported)

- Improved NFS speed (High bit rate movie will play better even

with 10/100 connection )

?¤ In case you have problem with 1G LAN, we recommend to use

10/100M mode.

(1G option may or may not work better than 10/100M mode depends on the

network environment)

6) UJukebox

- External subtitle when playing ISO file is supported but the

name of subtitle should be same as the ISO file

TViX can show two different subtitle in at the same time when selecting

the external subtitle.

- Position of internal subtitle can be adjusted.

?¤ How to : After pressing the subtitle key on the remote, while

the ??subtitle mode?? OSD is shown, press the up/down key on the remote

(for internal/external text subtitle, after pressing the subtitle key on

the remote, you can adjust the position and size of it as well)

7) Etc

- Improved UI : appearance of some icons have been enhanced.

- Keeps separate BCS value according to output Hz (23.976, 24,

25, 29.97, 30, 50, 59.94 and 60Hz)

- Known issues for Video related

- Some TP/TS information may not correct.

- When HD Audio pass-through is on, S/PDIF does not output.

- When HD Audio pass-through is off with HD audio stream, the

playback is not smooth.

?? When DTS audio setting is digital, HDMI audio is ON and HD

audio passthrough is set to ON, then audio is not heard on the SPDIF

output.

?? For the same setting, if HDMI audio is set to OFF, then audio

is HEARD on the SPDIF output.

- Some TP/TS files may cause the system rebooting.

- Some WMV may not play correctly.

- The digital output for AAC/WMA is disabled.

- Does not support PCM audio track on MP4 now.

- Some low sampling frequency on AVI and MKV may not sound on HDMI.

- Some MKV with AAC may not sound.

- Known issues for Audio and pictures playing

- For MP3 files with low sampling frequency, the TVIX might crash

while playing or trick play like FF or RW.

- Known issues for PVR

- After channel changed, you may not here audio in short time. This

is the bug from the chip manufacturer. To solve this, you can press DTV

key or Audio key on the remote.

- Known issues for general issues.

- If you play files without refreshing the file list after delete

files through FTP or SAMBA server, the system will reboot.

<POBIERZ>

Edytowane przez janek_pl

Udostępnij tę odpowiedź


Odnośnik do odpowiedzi
Udostępnij na innych stronach

Official DviCo 6500/7000 Firmware 1.3.150 (BDLite Edition)

% TViX HD M-6500 1.3.150(UJukebox) Release Note

1) UPnP feature

- UPnP media server can be detected on pressing "Media Server" button

- UPnP may support high bitrate contents which cannot be supported by NFS

- Internet Radio can be supported if it is proxied or linked through UPnP server.

This was tested through Twonky Media server and TVersity server

** Issues on UPnP **

- Audio Playlist, Icon view and Thumbnail view are not supported

- Background music is not supported while playing slideshow

- Some internet radio may not be supported

- Repeat all and shuffle are not working

2) Advanced TS/TP player

- Trick play works including rewind.

- Embedded subtitles(PGS : Presentation Graphic Stream) are supported with subtitle key on the remote.

The type of PGS language is not showed.

- Progressive Scan(24Hz) Detection issue on TS file format is fixed

- Applied file format : mpg, mpeg, vob, tb, ts, trp, m2t, m2p, m1v, m2v, m4v, dat, m2ts, mts, tod, mod, bdmv, bdm. It is a new TS/TP player written by us not using SDK code. It has better features but the player has not been tested a lot. There may be some files which do not work better

than old TS/TP player.

3) Added native resolution output option

- '720p23.976/24Hz' contents can be set to 720p23.976/24Hz or 1080p23.976/24Hz output

- '720p25/29.97/30Hz' contents can be set to 720p25/29.97/30Hz or 720p50/59.94/60Hz output

4) Audio

- fixed trick play for mp3

- fixed the indication of duration time and bitrate for wavepack

- fixed the indication of duration time for mp3 VBR

5) Network

- When no internal HDD or USB storage, mount the network drive automatically after booting

6) ETC

- Image overlapped issue on Thumbnail mode is fixed.

% Known issues for Video related

- Some TP/TS information may not be correct

- When HD Audio pass-through is on with HD audio stream, S/PDIF does not work

- When HD Audio pass-through is off with HD audio stream, playback may not be smooth

- When DTS audio setting is digital, HDMI audio is ON and HD audio pass-through is set to ON, then audio is not heard on the SPDIF output

For the same setting, if HDMI audio is set to OFF, then audio is HEARD on the SPDIF output

- Some TP/TS files may cause the system rebooting

- Some WMV may not play correctly

- Digital output for AAC/WMA is disabled

- Does not support PCM audio track on MP4 now

- Some low sampling frequency on AVI and MKV may not sound on HDMI

- Some MKV with AAC may not sound

% Known issues for Audio and pictures related

- For MP3 files with low sampling frequency, the TVIX might crash while playing or trick play like FF or RW.

% Known issue for Network

- D-Link DWA-140 11n wireless network is not working

- BD ISO playback through Network.

It stutters most of the times. It is because mounting ISO as a drive overhead is too much for 6500 CPU. So, it looks like hardware limitation. We are trying to optimize it but it may not result to success. We recommend to use IFO structure.

- If you play files without refreshing the file list after delete files through FTP or SAMBA server, the system will reboot

- When switching 100<-> 1G mode, sometimes DHCP doesn¡¯t work properly. but it will be fixed with next firmware

% Known issues for PVR

- After channel changed, you may not here audio in short time. This is the bug from the chip manufacturer. To solve this, you can press DTV key or Audio key on the remote.

*** If you play files with HD audio tracks like Dolby TrueHD, Dolby Digital Plus, DTS-HD MA or LPCM, you'd better turn on HD Audio pass through on the setup even though you don¡¯t have a receiver that supports decoding of these formats. Otherwise, you will hear strange noise with some repetitive popping noise. Currently, we don¡¯t support core decoding, if you don¡¯t have a HD audio decoder receiver, you need to select other then these HD audio tracks audio track for now.

<pobierz>

Edytowane przez janek_pl

Udostępnij tę odpowiedź


Odnośnik do odpowiedzi
Udostępnij na innych stronach

Firmware 1.3.158 (BDLite Edition)

Download link for 1.3.158

http://demod.dvico.com/PreRelease/tvix_M-6x00_1.3.158_.zip

Below are the list of bug fixes.

1) Network

- WiFi works again

- D-LINK DWA-140 11n works. (only the WEP 64bit is supported )

- Improved stability when getting IP address from DHCP when using wired network.

2) Audio

- Supports the multi channel for FLAC and WAV

- Supports the 24bit for FLAC and WAV

- Supports the repeat and shuffle when playing through UPnP

Other issues are Similar to 1.3.150

% Known issues for Video related

- When HD Audio pass-through is on with HD audio stream, S/PDIF does not work

- When HD Audio pass-through is off with HD audio stream, playback may not be smooth

- When DTS audio setting is digital, HDMI audio is ON and HD audio

pass-through is set to ON, then audio is not heard on the SPDIF output

¡¤ For the same setting, if HDMI audio is set to OFF, then audio is

HEARD on the SPDIF output

- Some WMV may not play correctly

- Digital output for AAC/WMA is disabled

- Does not support PCM audio track on MP4 now

- Some low sampling frequency on AVI and MKV may not sound on HDMI

- Some MKV with AAC may not sound

% Known issues for TS/TP Video related

- The type of PGS language is not showed.

- Some TS/TP may not sound.

- It is a new TS/TP player written by us not using SDK code. It has

better features but the player has not been tested a lot.

- It may have some files which do not work better than old TS/TP

player.

% Known issues for Video and pictures related

- For MP3 files with low sampling frequency, the TVIX might crash while

playing or trick play like FF or RW.

% Known issue for Network

- BD ISO playback through Network.

¡¤ It stutters most of the times. It is because mounting ISO as a

drive overhead is too much for 6500 CPU.

¡¤ So, it looks like hardware limitation. We are trying to optimize

it but it may not result to success.

¡¤ We recommend to use IFO structure.

- If you play files without refreshing the file list after delete files

through FTP or SAMBA server, the system will reboot.

% Known issues for PVR

- After channel changed, you may not here audio in short time. This is

the bug from the chip manufacturer. To solve this, you can press DTV key

or Audio key on the remote.

% Known issues for UPnP

- Audio Playlist, Icon view and Thumbnail view are not supported

- Background music is not supported while playing slideshow

- Some internet radio may not be supported

Udostępnij tę odpowiedź


Odnośnik do odpowiedzi
Udostępnij na innych stronach

6500/7000: Firmware 1.3.168 (BDLite Edition)

TViX HD M-6500 1.3.168(UJuckbox) Release note

1) Audio

• Can turn off the new audio playlist function in setup

• During the slide show through UPnP, it supports playing background songs which exist with the name of ¡®automp3¡¯ folder on local HDD, Network or USB.

• UI improvement : added a icon to display the shuffle(random) and repeat status during playing audio.

• Some bugs were fixed

o When pressing Audio key on the remote, jump to Audio folder If there no Audio/Playlist folder.

o Can save the playlist to the network folder when playing audiothrough network.

o When the repeat audio is on , pressing next key on the remote makes repeat mode off it has been fixed…

o When playing internet radio Just after booting, no sound problem through HDMI was fixed

2) Network

• The issue of pressing ¡®5¡¯ key on the remote in setup for network was fixed.

o Can send two connection simultaneously for FTP (tested by FileZillar ftp client)

o UI improvement : added ¡®Wait¡¯ OSD when setting network, which it takes long time.

Other issues are similar to 1.3.158

Known issues for Video related

• When HD Audio pass-through is on with HD audio stream, S/PDIF does not work

• When HD Audio pass-through is off with HD audio stream, playback may not be smooth

• When DTS audio setting is digital, HDMI audio is ON and HD audio pass-through is set to ON, then audio is not heard on the SPDIF output. (For the same setting, if HDMI audio is set to OFF, then audio is HEARD on the SPDIF output.)

• Some WMV may not play correctly

• Digital output for AAC/WMA is disabled

• Does not support PCM audio track on MP4 now

• Some low sampling frequency on AVI and MKV may not sound on HDMI

• Some MKV with AAC may not sound

% Known issues for TS/TP Video related

• The type of PGS language is not showed.

• Some TS/TP may not sound.

• It is a new TS/TP player written by us not using SDK code. It has better features but the player has not been tested a lot.

• It may have some files which do not work better than old TS/TP player.

% Known issues for audio and pictures related

• For MP3 files with low sampling frequency, the TVIX might crashwhile playing or trick play like FF or RW.

% Known issue for Network

• BD ISO playback through Network. It stutters most of the times. It is because mounting ISO as a drive overhead is too much for 6500 CPU. So, it looks like hardware limitation. We are trying to optimize it but it may not result to success. We recommend to use IFO structure.

• If you play files without refreshing the file list after delete files through FTP or SAMBA server, the system will reboot.

% Known issues for PVR

• After channel changed, you may not here audio in short time. This is the bug from the chip manufacturer. To solve this, you can press DTV key or Audio key on the remote.

% Known issues for UPnP

• Audio Playlist, Icon view and Thumbnail view are not supported

• Some internet radio may not be supported

*** If you play files with HD audio tracks like Dolby TrueHD, Dolby Digital Plus, DTS-HD MA or LPCM, you'd better turn on HD Audio pass through on the setup even though you don¡¯t have a receiver that supports decoding of these formats. Otherwise, you will hear strange noise with some repetitive popping noise. Currently, we don¡¯t support core decoding, if you don¡¯t have a HD audio decoder receiver, you need to select other then these HD audio tracks audio track for now.

<pobierz>

Udostępnij tę odpowiedź


Odnośnik do odpowiedzi
Udostępnij na innych stronach

6500/7000: Firmware 1.4.14

Video

- Supports UTF8

- When browsing files, able to see all of language files without changing the language setting.

- Able to change main language in setup without rebooting

- Supports Hebrew and Arabic characters for subtitles

- Adds Portuguese and Vietnamese for the OSD language

- Able to change the default encoding language for subtitle in setup and even during playing movie with subtitle key on the remote

=> Also can change on the fly by pressing subtitle key one the remote while watching video files, select 'Encoding' button on the window and the choose the encoding languate.

- When NFS, able to select a encoding type type between the code page and UTF8

=> When using netshare, you must use the code page. You only can see the language you set on TVIX.

=> When using other NFS servers beyond netshare like NAS, Linux or so on, better to use UTF8 in most of cases.

DTV

- The speed of mode changes between video and DTV has been increased a lot.

Other issues are similar to 1.3.168

Known issues for Video related

** Unstable composite/component output with some TVs. (We think we solved the problem but it's under test and it has not incorporated in this release)

- When HD Audio pass-through is on with HD audio stream, S/PDIF does not work

- When HD Audio pass-through is off with HD audio stream, playback may not be smooth

- When DTS audio setting is digital, HDMI audio is ON and HD audio pass-through is set to ON, then audio is not heard on the SPDIF output

(For the same setting, if HDMI audio is set to OFF, then audio is HEARD on the SPDIF output.)

- Some WMV may not play correctly

- Digital output for AAC/WMA is disabled

- Does not support PCM audio track on MP4 now

- Some low sampling frequency on AVI and MKV may not sound on HDMI

- Some MKV with AAC may not sound

Known issues for TS/TP Video related

- The type of PGS language is not showed.

** TS/TP with AAC audio has problem in outputing sound.

Known issues for audio and pictures related

- For MP3 files with low sampling frequency, the TVIX might crash while playing or trick play like FF or RW.

Known issue for Network

- BD ISO playback through Network.

It stutters most of the times. It is because mounting ISO as a drive overhead is too much for 6500 CPU.

So, it looks like hardware limitation. We are trying to optimize it but it may not result to success.

We recommend to use IFO structure.

- If you play files without refreshing the file list after delete files through FTP or SAMBA server, the system will reboot.

Known issues for PVR

- After channel changed, you may not here audio in short time. This is the bug from the chip manufacturer. To solve this, you can press DTV key or Audio key on the remote.

Known issues for UPnP

- Audio Playlist, Icon view and Thumbnail view are not supported

- Some internet radio may not be supported

*** If you play files with HD audio tracks like Dolby TrueHD, Dolby Digital Plus, DTS-HD MA or LPCM, you'd better turn on HD Audio pass through on the setup even though you don’t have a receiver that supports decoding of these formats. Otherwise, you will hear strange noise with some repetitive popping noise. Currently, we don’t support core decoding, if you don’t have a HD audio decoder receiver, you need to select other then these HD audio tracks audio track for now.

<POBIERZ>

Udostępnij tę odpowiedź


Odnośnik do odpowiedzi
Udostępnij na innych stronach

6500/7000DviCo releases new update: 1.4.19

Player

- When a user sets OSD language in SET UP menu, the pop-up menu for default subtitle encoding selection is displayed automatically..

- Users need to change encoding type according to the subtitle that they want..Let’s say a user set to English for the OSD language and set Hebrew for the subtitle encoding. When this user tries to load French subtitle, it will not

shown correctly since it is saved with different encoding. In this case, this user need to change encoding to Latin-I by pressing Subtitle key and select the encoding button on the popup and select Latin-I.

- AAC audio track on TP/TS files is now audible.

- Fixed : a subtitle track is not shown on a specific TS stream

- Fixed : a system turn off while trying to change subtitle sync by pressing CH up or down key.

- Fixed : keep showing unsupported font message after boot.

- Fixed : an apostrophe is not shown correctly on French OSD.

DTV

- Fixed the scanning issue.

- Fixed : Info OSD is disappear too quickly.

- Fixed : System is unstable if a user press audio key while recording.

- Fixed : Channel name is shown strangely on VFD.

- Now, the power button will turn off the system rather than showing file play mode..

<POBIERZ>

Udostępnij tę odpowiedź


Odnośnik do odpowiedzi
Udostępnij na innych stronach

DviCo M-6500/7000 1.4.22

Player

a. Fixed: Bookmarks are not saved sometimes.

c. Fixed: Cannot play M4V files.

d. Fixed: The audio album jacket is not shown on the info page when an audio file is being played.

e. Fixed: The chapter title is not shown on the info while a MKV file with chapters info is being played.

f. Fixed: When the bookmark key is pressed while a MKV file with chapters info, the chapter titles are not shown on the chapter selection popup.

g. Fixed: The 'я' is not shown for the Cyrillic subtitle.

h. Fixed: The setup menu shows strange characters when OSD Language is Vietnamese.

DTV

a. Fixed: The scheduled recording does not start.

b. Fixed: TVIX is not stable if user switch between DTV and player frequently.

c. Fixed: The DTV does not start with the last watching channel.

<POBIERZ>

Edytowane przez janek_pl

Udostępnij tę odpowiedź


Odnośnik do odpowiedzi
Udostępnij na innych stronach

Firmware 1.4.25 PreRelease

Changes from 1.4.22

1) Player

- When used with some TVs, screen flickers and becomes black after a few

seconds. This happens very irregualry, so it is hard to debug.

We think it's SDK(Software Develpment Kit) bug from Sigmadesigns. So,

we did some work around. When this happen, please press "VIDEO" button

once and it will become nomal.(It is hard to check whether it solves

the problem because we only have one monitor (out of 100 TVs and

monitors ) that can reproduce the problem but it happens once in days.

The SDK that the firmware 1.2.52 based upon does not have this problem

but we cannot go back to this SDK because it has other bugs including

not outputing HD audio output through optical or coax.

- Fixed: The audio file tag info is broken. Does not show APE and CUE

tags.

- Fixed: The Prev and Next key does not work as paging while music play.

- Fixed: The audio album jacket is not shown on the info page when

an audio file is selected from icon mode

- Improved: Now, shows the audio jacket files on the folder of currently

playing file in the Audio info page.

2) ETC

- Fixed: Cannot copy large size files over SAMBA.

- Fixed: System reboot when user try to remount local HDD after copy

files through FTP.

http://dvdnews.free.fr/TViX/M-6500/tvix_M-6x00_1.4.25.zip

Edytowane przez Abcd

Udostępnij tę odpowiedź


Odnośnik do odpowiedzi
Udostępnij na innych stronach

On the korean page of dvico there is an announce of a new firmware version 1.4.26

http://demod.dvico.com/beta/tvix_M-6x00_1.4.26.zip

1. Photo Play the [New Folder] When you select a move was not Fix

2.Folder.jpg also used as an icon (currently used only in the folder.jpg and folder.png.)

By supporting Windows Media Player AFolder.jpg CD cover to save the people from the windows and icons look the same mode.

Edytowane przez rhome

Udostępnij tę odpowiedź


Odnośnik do odpowiedzi
Udostępnij na innych stronach

Dvico TVIX M-6500 M-7000 Firmware 1.5.10 Pre-release

http://demod.dvico.com/PreRelease/tvix_M-6x00_1.5.10.zip

Zmiany od 1.4.26:

1) DTV

1. Now color space option is available just like file player.

2. Some UI bug has been fixed.

3. Fixed: In some case, TVIX reboot when DTV stops.

2) Player

1. Audio playlist now supports up to 8192 files.

2. Navigation UI Enhanced. (Not supported on UPnP)

A. The disc navigation removed from the top of the list UI. To navigate to USB, Network, UPnP, a user need to press GOTO key while you browse, then the navigation popup will be shown.

B. Users can select TEXT or more graphical interface mode for each of Video, Audio and Photo on the Setup-Misc. (You can still set icon mode using Function key in Text mode.) For Audio and Photo folders, album art and thumbnail mode will behave similar to the Icon mode and the Thumbnail mode of our old firmware, But for video, Cover art mode behaves differently from older firmware. Other then video folders behave differently.

For Audio,

1. Any folders named 'Audio', 'Automp3' and 'Music' (case insensitive) under the root folder will be shown as an icon mode (9 columns x 4 rows) with the icon size 120 * 120(pixels) so if the folder.jpg (Folder.jpg, folder.png) size is 120*120, the icon will be shown without scale.

(Coincidently, Windows Media Player save the covers as Folder.jpg)

2. The folder which has no subfolder will be shown as list mode, so users can see file names easily.(Background image is the tvix.jpg on the folder, background image may differ in actual firmware, please replace with your choice of preference)

3. Now, jpg files which start with 'albumart' ('albumartxxxx~xxx.jpg) will not be shown on the list.

However, these will be shown as an icon when you press INFO button while you play music.

If you have many albumartxxx~xxxx.jpg files in your folder, these files will be shown sequentially in time.

For Photo,

1. Any folders named 'Photo' or 'Picture' on the root folder will be shown as Thumbnail UI (9 columns x 4 rows).

For Video,

1. Any folders named 'Video', 'DVD' and 'Bluray' under the root folder will be shown as a Cover art mode (8 columns x 3 rows). The size of the icon is 138x186 pixels.

Edytowane przez Abcd

Udostępnij tę odpowiedź


Odnośnik do odpowiedzi
Udostępnij na innych stronach

Tvix M-6500/7000 1.5.11

Changes from 1.5.10

1) For Player

1. Better support for EXIF rotation information in Jpeg files

2. Change back to old icon size (200*200) for normal and Album

Jacket mode

(We referred to the 1.5.10 feedback, which all preferred 200x200

size rather than new 120x120 size.)

(Video folder icon size will remain as previous version)

3. The play button is the default button on the synopsis page.

(The focus will be on PLAY button not BACK button)

4. Now, the icon mode change with FUNCTION key on the remote works

on text mode folders.

(It worked only when all the three mode was text mode in 1.5.10)

5. More Video cover folders are added

If a name of folder, which on the root folder, is starts with

one of below words(case insensitive), it will shows

Video cover art mode instead a normal icon mode.

- video, movie, dvd, bluray, blu-ray, film,

cinema, animation, drama, miniseries, tv series,

music video

6. Rearrange the file list page for some severe over scan displays.

Depends on the display, there could be still be

some hiding at the edges. We thought we need more explanation

for new mode because it could be confusing.

Below is the explanation between new mode in comparison to old mode

with ICON mode using FUNCTION Key

on the remote controller.

1. Video

Cover Art vs Text(with ICON mode turned on using FUNTION key

on the remote controller, it refers

to this mode with Text mode below)

- Cover Art : * It shows cover art for all the folders under

(video, movie, dvd, bluray, blu-ray,

film, cinema, animation,

drama, miniseries, tv series, music video)

** It will show Back, Preview Play

button when there is no sub folder in current folder.

- Text : * it shows Cover Art only the folders set to ICON

mode using FUCTION Key on the remote controller

** It will not show Back, Preview, Play

button even though it will show cover art icon and

synopsis (as background image)

Both mode will show 138x186 size icon.

2. Audio

Album Art : * It will show 200x200 Album art for all the

folders under Audio, Automp3 and Music

** It will show files as file list rather than

Album art icon for folders without any sub folders.

Text : * It will show 200x200 Album art only for the folders

set to ICON mode using FUNCTION key on

the remote controller

** It will show 200x200 ICON if the folder is set

to ICON mode regardless of existence of sub folders.

3. Photo

Thumbnail mode : It will show jpeg files as 120x120

thumbnails for all the folders under Photo or Picture

Text mode : It will show jpeg files as 120x120 thumbnails

for only the folders set to ICON mode using

FUNCTION key on the remote controller

Besides above there is no difference between Thumbnail mode and

Text mode in Photo.

- Video folders : video, movie, dvd, bluray,

blu-ray, film, cinema, animation, drama,

miniseries, tv series, music

video

- Audio folders : Audio, Automp3 and Music

- Photo folders : Photo or Picture

- You can set to ICON mode for any folder besides above

folders using FUNCTIN key on the remote controller.

Then it will show folders as 200x200 icons.

- Of course, you will need to prepare folder.jpg file if you

want your preferred ICON image appear as a folder icon.

2) For the DTV, (No change)

- There is no separate color space option for DTV. The color space on

Video option will be used for DTV.

*** Please understand that users need to make appropriate folder.jpg and

tvix.jpg files for each folders to make

TViX work as described above.

*** You need to do the job manually or using the third party program

(like TViXIE or GUI builder)

*** We do not provide cover art materials. The cover art materials shown

in the release note is just for better explanation purpose.

All other issues are same to 1.4.26.

<POBIERZ>

Udostępnij tę odpowiedź


Odnośnik do odpowiedzi
Udostępnij na innych stronach

http://www.station-drivers.com/telechargem...rivers.com).zip

nowy soft 1.5.16

* 1) Player

* 1. Fixed: Disk corrupted sometiles after copy files from PC to TVIX through USB.

* 2. Fixed: Cannot change the partition when copying files using the function key due to navigation buttons removed.

oraz 1.5.17

http://www.station-drivers.com/telechargem...7000_1.5.17.exe

* 1) Player

* 1. Fixed: Folder or files with some characters are not shown.

Udostępnij tę odpowiedź


Odnośnik do odpowiedzi
Udostępnij na innych stronach

* 1)has broken Russian language and cannot support HD Audio pass thru. Here is the latest firmware 1.5.19 fix above matter and some bugs. No change log details.

Udostępnij tę odpowiedź


Odnośnik do odpowiedzi
Udostępnij na innych stronach

cos staneło z nowymi firmware'ami

Udostępnij tę odpowiedź


Odnośnik do odpowiedzi
Udostępnij na innych stronach

ja to bym chętnie zobaczył wsparcie dla Youtube i np. flickr, czy picassa, bo to niby hi-end player a już 2 razy tańszy sprzęt ma coś takiego.

Ojciec ma w azboxie YT i jest to bardzo fajne, szczegolnie jak chcesz cos na szybko pokazać większej liczbie osób.

Udostępnij tę odpowiedź


Odnośnik do odpowiedzi
Udostępnij na innych stronach

Dołącz do dyskusji

Możesz dodać zawartość już teraz a zarejestrować się później. Jeśli posiadasz już konto, zaloguj się aby dodać zawartość za jego pomocą.
Uwaga: Twój wpis zanim będzie widoczny, będzie wymagał zatwierdzenia moderatora.

Gość
Dodaj odpowiedź do tematu...

×   Wklejono zawartość z formatowaniem.   Usuń formatowanie

  Dozwolonych jest tylko 75 emoji.

×   Odnośnik został automatycznie osadzony.   Przywróć wyświetlanie jako odnośnik

×   Przywrócono poprzednią zawartość.   Wyczyść edytor

×   Nie możesz bezpośrednio wkleić obrazków. Dodaj lub załącz obrazki z adresu URL.


  • Ostatnio przeglądający   0 użytkowników

    Brak zarejestrowanych użytkowników przeglądających tę stronę.

×
×
  • Dodaj nową pozycję...