Skocz do zawartości
  • 0
andsie1

Recovery Firmware

Pytanie

Witam.

W jaki sposób przywraca się Firmware na C-200 ?.

Pozdrawiam,

AndrzejS.

Udostępnij tę odpowiedź


Odnośnik do odpowiedzi
Udostępnij na innych stronach

1 odpowiedź na to pytanie

Rekomendowane odpowiedzi

  • 0

Ponawiam prośbę.

Przy fleszowaniu powstał błąd i pał mi C-200. Wszystkie funkcje są niedostępne. Po włączeniu urządzenia mam informację na TV o Recovery Firmware.

Muszę wgrać nowy firmware.

Pozdrawiam,

AndrzejS

EDIT.

Znalazłem

http://www.networkedmediatank.com/showthread.php?tid=27395

[C-200] How to recover Firmware if something goes wrong

Follow these instructions to recover the Popcorn Hour C-200 if the firmware update fails.

This method is only applicable for the Popcorn Hour C-200.

1. Download the following zip file: http://files.syabas.com/popcornhour/down...090729.zip

2. Unzip recovery-image.bin file into the root of a USB thumbdrive (must be format to FAT32 or NTFS file system only).

3. Connect the Popcorn Hour C-200 to a TV through the Component or Composite or HDMI outputs.

4. Power up the Popcorn Hour C-200.

5. Component or Composite or HDMI video will display blue background with "Firmware recovery. Please insert USB"

6. Plug the USB thumbdrive into the Popcorn Hour C-200 USB port to start the recovery process.

7. After successful recovery, power cycle will bring it up again to 02-01-090729-17-POP-408-000 firmware.

If steps 1 - 7 stated above fail, follow these instructions:

A. Power down the Popcorn Hour C-200.

B. Insert a jumper on uart0 (see http://files.syabas.com/popcornhour/down...jumper.jpg for exact location)

C. Plug the same USB thumbdrive with the same bin files into the Popcorn Hour C-200 USB port and the same component or composite or HDMI cables into the Popcorn Hour C-200 and TV. If these cables have not been removed since you followed steps 1-7, just leave them plugged in.

D. Power up the Popcorn Hour C-200

E. Follow steps number 5-7 above.

F. After the update process completed, power down the unit when the screen showing a message "rebooting in 10 seconds"

G. Remove the jumper.

H. Remove USB thumbdrive, component and/or composite cables.

I. Your Popcorn Hour will is now using 02-01-090729-17-POP-408-000 firmware.

J. Plug in desired connectors (HDMI, Component, Network, optical, etc.) and pat yourself on the back for successfully fixing your Popcorn Hour C-200.

AS

Edytowane przez andsie1

Udostępnij tę odpowiedź


Odnośnik do odpowiedzi
Udostępnij na innych stronach

Dołącz do dyskusji

Możesz dodać zawartość już teraz a zarejestrować się później. Jeśli posiadasz już konto, zaloguj się aby dodać zawartość za jego pomocą.
Uwaga: Twój wpis zanim będzie widoczny, będzie wymagał zatwierdzenia moderatora.

Gość
Odpowiedz na pytanie...

×   Wklejono zawartość z formatowaniem.   Usuń formatowanie

  Dozwolonych jest tylko 75 emoji.

×   Odnośnik został automatycznie osadzony.   Przywróć wyświetlanie jako odnośnik

×   Przywrócono poprzednią zawartość.   Wyczyść edytor

×   Nie możesz bezpośrednio wkleić obrazków. Dodaj lub załącz obrazki z adresu URL.


  • Ostatnio przeglądający   0 użytkowników

    Brak zarejestrowanych użytkowników przeglądających tę stronę.

×
×
  • Dodaj nową pozycję...