Skocz do zawartości

nds

Użytkownik
 Pokaż profil  Zobacz aktywność

  • Liczba zawartości

    6

  • Rejestracja

  • Ostatnia wizyta

Odpowiedzi dodane przez nds

  3. Napisano

    słuchajcie znalazłem takie coś...tutaj własnie jest coś o zmianie hex'a z tym, że calośc jest w j. ang...wiem wiem tzreba było się uczyć, ale niestety jakoś mi to nie wychodziło...dlatego jesli ktos zna troszkę lepiej ang. to czy mógłby mi to przetlumaczyć na polski rozum....z góry dzięki

    How to downgrade firmware for M2364D with 3.14 (maybe higher, not tested)

    Make sure you understand

    everything, otherwise do not try. You remain responsible of your acts.

    Method involves patching the

    firmware from LG Italy to make it look like an higher version than the one you have (I have 3.14, so

    tried with 3.15), in order to bypass the lock to prevent downgrading. But at the end you'll be offered

    with a choice, and the firmware finally burned will be the 3.14 original, unpatched (to minimize risk).

    1 - Download M2362D firmware from LG Italy (3.10)

    2 - Copy it to another file, and change the two occurrences of

    "3.10" to "3.15", or higher (depends on the version you have, make it higher). This step may not be needed

    but...

    3 - Using an hex editor, edit the copied file, and replace four occurrences of "030A00" to "030F00"

    (or whatever hex string that matches the version you have put in the filename, in hex). The four occurrences

    are located at offsets 108 and 40108 (a couple at each position), in both cases a few bytes before a string

    containing "M2362D-PZ".

    4 - Copy BOTH fw files (original 3.10 and patched) to the root folder of a USB drive.

    5 - With the TV powered off, insert the USB drive

    6 - Power on the TV

    7 - If all the previous steps are correct,

    you should be presented with a window offering you to upgrade to one of the two versions of the firmware you have copied in the USB drive.

    8 - SELECT THE UNPATCHED VERSION 3.10 (God only knows what would happen with the

    patched version), and click OK.

    9 - When it has been finish, push exit on the remote. The TV will reboot. Make

    sure you extract the USB drive to avoid going again in the upgrade process (remember, your TV at that point

    will have 3.10, and you still have your patched 3.15 in the drive).

    10 - At this point, you can apply the known method to enable DIVX on a 3.10 TV (infrared hack).

    11 - Enjoy

    Remember this has been tested on a M2362D with 3.14. No idea how other sizes of same model, or different firmware versions, will react.

    Good luck.

    Poradziłem sobie...pozdrawiam :))

  4. Napisano

    słuchajcie znalazłem takie coś...tutaj własnie jest coś o zmianie hex'a z tym, że calośc jest w j. ang...wiem wiem tzreba było się uczyć, ale niestety jakoś mi to nie wychodziło...dlatego jesli ktos zna troszkę lepiej ang. to czy mógłby mi to przetlumaczyć na polski rozum....z góry dzięki

    How to downgrade firmware for M2364D with 3.14 (maybe higher, not tested)

    Make sure you understand

    everything, otherwise do not try. You remain responsible of your acts.

    Method involves patching the

    firmware from LG Italy to make it look like an higher version than the one you have (I have 3.14, so

    tried with 3.15), in order to bypass the lock to prevent downgrading. But at the end you'll be offered

    with a choice, and the firmware finally burned will be the 3.14 original, unpatched (to minimize risk).

    1 - Download M2362D firmware from LG Italy (3.10)

    2 - Copy it to another file, and change the two occurrences of

    "3.10" to "3.15", or higher (depends on the version you have, make it higher). This step may not be needed

    but...

    3 - Using an hex editor, edit the copied file, and replace four occurrences of "030A00" to "030F00"

    (or whatever hex string that matches the version you have put in the filename, in hex). The four occurrences

    are located at offsets 108 and 40108 (a couple at each position), in both cases a few bytes before a string

    containing "M2362D-PZ".

    4 - Copy BOTH fw files (original 3.10 and patched) to the root folder of a USB drive.

    5 - With the TV powered off, insert the USB drive

    6 - Power on the TV

    7 - If all the previous steps are correct,

    you should be presented with a window offering you to upgrade to one of the two versions of the firmware you have copied in the USB drive.

    8 - SELECT THE UNPATCHED VERSION 3.10 (God only knows what would happen with the

    patched version), and click OK.

    9 - When it has been finish, push exit on the remote. The TV will reboot. Make

    sure you extract the USB drive to avoid going again in the upgrade process (remember, your TV at that point

    will have 3.10, and you still have your patched 3.15 in the drive).

    10 - At this point, you can apply the known method to enable DIVX on a 3.10 TV (infrared hack).

    11 - Enjoy

    Remember this has been tested on a M2362D with 3.14. No idea how other sizes of same model, or different firmware versions, will react.

    Good luck.

  6. Napisano

    Witam, pomózcie jesli wiecie...chodzi o to, że kupiłem sobie modelik M2762D-PC robie wszystko jak w instrukcji z tym że nie moge zmienic Pm na PPM:( także stwierdziałem, że wina soti po stronie fw obecnie mam 3.14.0 wiec spróbowałem wgrać 3.05 tego modelu, pen sformatowany na fat32 podpinam pod monitorek i nic sie nie dzieje, nie odczytuje mi tego fw 3.05, poprostu wyswietla sie wybór zdjec czy muzyki.....:( powiedzcie znacie jakąs metode na obejscie tego??zapewne wina tkwi w fw 3.14....

×
×
  • Dodaj nową pozycję...