Ja na razie pass. Za dużo bugów jak na początek.
• When trying to add manually a NFS shortcut, then the entered text is not accepted and the edit box still shows a default map to some IP.
• When scanning the network for NFS shares, it takes a considerable amount of time (I got about 25 shares on my network from over 10 devices). But this can be remedied by scanning multiple times where eventually it will show all shares.
• When navigating in NFS shares the "File Operations" are disabled, so that you cannot copy or move files (in Cifs-samba ie. Windows shares it works)
• NFS does not work for MTU higher that 1500. So jumbo frames do not work (I tested with a qnap nas). In this case entering a NFS share will stuck the device (spinning circle) trying to access the share.
• DLNA does not work and crashes (tested with Twonky Media on qnap nas) and will soft reboot the GUI (disabling access to the local HDD, when a re cycle is needed).
• Accessing a BD iso (3D but also 2D isos) over cifs/samba AND NFS works but the audio is lost every vew seconds and the video playback stutters (tested with qnap nas). Opening the same files on a locally attached HDD they work olmost perfectly, meaning that throughout a whole length of a movie you will have 3-4 hickups only.
• You cannot select as default subtitles to have "None". Also "Greek" was not included in the list. "None" is neccessary in order not to have all the time to fiddle around to disable the subtitles (as there is no easy way. you must go to the menu and press about 10 buttons to disable the subtitles...)
• when you move the movie with the timeline (using the arrows left and right) the player "looses" the 3D setting and switches to 2D. This happend with .MKV and with 3DBD. Switching it back to 3D manually resolves the problem without any further annoyances.
• It seems to me that .mkv files that are played 24p, when send to the player they show some small stuttering every 10 seconds or so. Maybe the 23.xxx to 24 conversion has some issues. The TV reports the stream as 24p.
• When you enable the HDD spindown time, the HDD after having spinned down, does no spin up again automatically. When in the files browser you must press the green button to start it again. This is not useful, because when you need to access the HDD from samba the HDD does not spin up. You can connect to the device, but the share 'HDD' fails (because the HDD is off).
• The network issues report earlier, when opening a 3DBD iso on a NAS do occur on specific vendors. Qnap nas stutters, Intel NAS does very little. So hopefully this can be corrected in the next firmware, because this prooves that it's not a hardware problem.
• the 3D modus must be activated manually for .mpo files: to view .mpo photos you must integrate the photos in the photo library of the HD900B. Then, if you select a photo from the database, the photo will displayed in 2D instead of 3D! A manual aktivation is necessary (menu button -> 3D). Sample photos can be downloaded here:
http://www.biohemmet...opic.php?id=475
• movies which are created with the FUJI 3D camera are not playable in 3D (no problems so far in 2D). Furthermore a manual activation of the 3D modus is not possible. Sample movie can be downloaded here:
http://www.megaupload.com/?d=J90IIQ7M
• The media file information will not displayed correctly if you open a photo and press the INFO button (not all fields filled).
http://www.avsforum....d.php?t=1367468